Product Description
ADJ PROFILE PANEL RGBA 288x10mm RGBA LED Panel
The ADJ Profile Panel RGBA is a compact indoor LED Color Panel powered by 288 10mm red, green, blue and amber LEDs. It may be used as a standard wash fixture, or run it in its built-in programs or sound active mode to create exciting multi-colored lightshows. With four DMX channel modes and six operational modes users get an unprecedented variety of control over the fixture The Profile Panel RGBA has built in programs, sound mode, master slave mode and a DMX mode.
The Profile Panel RGBA produces a 30-degree beam. A wider wash may be achieved by adding a light shaping filter into the slit on the side of the panel. It comes with a locking power cord, UC IR wireless remote and Airstream IR sensor inside the box. Being lightweight and compact in size, this fixture may be set it up anywhere indoors, the dual scissor yoke let you hang the fixture on truss or mount it on a wall. With extremely long life LEDs, low power consumption, and very low heat output, this fixture can all night with no duty cycle - plus little to no heat is emitted onto performers. Great for small performance stages, permanent installations or mobile entertainers.
What makes the Profile Panel RGBA better than the Profile Panel RGB?
- Brighter: Uses 10mm LEDs vs. 5mm LEDs
- More Colors: Uses RGBA (Red, Green, Blue & Amber) LEDs vs. RGB only
- Locking Power Connections: Users can now daisy chain the power from one fixture to the next using the upgraded locking power In/Out connections vs. just an IEC input.
- Remote Included: Includes the UC IR wireless remote control vs. optional wired remote
Sku #: PRO763
Features
- Compact indoor LED Color Panel with 288, 10mm LEDs (72 Red, 72 Green, 72 Blue, & 72 Amber LEDs - rated at 100,000 hrs.)
- Very smooth field with rich palettes of color created by mixing the Red, Green, Blue, & Amber LEDs
- Great as an architectural wall wash or for performance stages where traditional stage lighting emit a lot of heat onto performers
- Light Shaping Filter slot to widen beam angle (filter size: 210x375mm)
- Color strobe effect
- 4 DMX channel modes: 4, 7, 9 or 32
- 47 built-in Color Macros
- Electronic Dimming: 0 - 100%
- Includes dual scissor yoke to hang on truss and built-in mounting brackets to hang on a wall
- Very low heat output
- Run all night – no duty cycle
Included
- UC IR wireless remote control
- Airstream IR App transmitter (Airstream IR iOS APP compatible)
- Locking power to Edison cord
Specs
Optical
- Beam angle: 30-degrees
- 288, 10mm LEDs (72 Red, 72 Green, 72 Blue, & 72 Amber LEDs)
Connections
- 3-pin DMX In/Out
- With Wired Digital Communication Network
- Locking Power In/Out connections to Daisy Chain up to 20 fixtures Max @ 120V
Control
- 4-button LED display on rear panel
- 6 Operational modes: Built-in programs, Sound mode, Static Color mode, Auto Run, RGBA Dimmer mode, & DMX mode
Electrical
- Power Draw: 35W
- Multi-voltage operation: 100-240V, 50/60Hz
Physical
- Dimensions (LxWxH): 16.73” x 3.2” x 10.75” / 425x82x275mm
- Weight: 7.8 lbs. / 3.5 kgs.
- Metal black housing
Other Details
A. ADJ Products, LLC hereby warrants, to the original purchaser, ADJ Products, LLC products to be free of manufacturing defects in material and workmanship for a prescribed period from the date of purchase (see specific warranty period on reverse). This warranty shall be valid only if the product is purchased within the United States of America, including possessions and territories. It is the owner’s responsibility to establish the date and place of purchase by acceptable evidence, at the time service is sought. B. For warranty service you must obtain a Return Authorization number (RA#) before sending back the product–please contact ADJ Products, LLC Service Department at 800-322-6337. Send the product only to the ADJ Products, LLC factory. All shipping charges must be pre-paid. If the requested repairs or service (including parts replacement) are within the terms of this warranty, ADJ Products, LLC will pay return shipping charges only to a designated point within the United States. If the entire instrument is sent, it must be shipped in it’s original package. No accessories should be shipped with the product. If any accessories are shipped with the product, ADJ Products, LLC shall have no liability whatsoever for loss of or damage to any such accessories, nor for the safe return thereof. C. This warranty is void if the serial number has been altered or removed; if the product is modified in any manner which ADJ Products, LLC concludes, after inspection, affects the reliability of the product; if the product has been repaired or serviced by anyone other than the ADJ Products, LLC factory unless prior written authorization was issued to purchaser by ADJ Products, LLC; if the product is damaged because not properly maintained as set forth in the instruction manual. D.This is not a service contract, and this warranty does not include maintenance, cleaning or periodic check up. During the period specified above, ADJ Products, LLC will replace defective parts at its expense with new or refurbished parts, and will absorb all expenses for warranty service and repair labor by reason of defects in material or workmanship. The sole responsibility of ADJ Products, LLC under this warranty shall be limited to the repair of the product, or replacement thereof, including parts, at the sole discretion of ADJ Products, LLC. All products covered by this warranty were manufactured after August 15, 2012, and bear identifying marks to that effect. E.ADJ Products, LLC reserves the right to make changes in design and/or improvements upon its products without any obligation to include these changes in any products theretofore manufactured. No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with products described above. Except to the extent prohibited by applicable law, all implied warranties made by ADJ Products, LLC in connection with this product, including warranties of merchantability or fitness, are limited in duration to the warranty period set forth above. And no warranties, whether expressed or implied, including warranties of merchantability or fitness, shall apply to this product after said period has expired. The consumer’s and/or Dealer’s sole remedy shall be such repair or replacement as is expressly provided above; and under no circumstances shall ADJ Products, LLC be liable for any loss or damage, direct or consequential, arising out of the use of, or inability to use, this product. This warranty is the only written warranty applicable to ADJ Products, LLC and American Audio products and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published. MANUFACTURER’S LIMITED WARRANTY PERIODS: Non L.E.D. Lighting Products = 1-year (365 days) Limited Warranty (Such as: Special Effect Lighting, Intelligent Lighting, UV lighting, Strobes, Fog Machines, Bubble Machines, Mirror Balls, Par Cans, Trussing, Lighting Stands etc. excluding LED and lamps) Laser Products = 1 Year (365 Days) Limited Warranty (excluding laser diodes which have a 6 month limited warranty) L.E.D. Products = 2-year (730 days) Limited Warranty (excluding batteries which have a 180 day limited warranty). Note: 2 Year Warranty only applies to purchases within the United States. StarTec Series = 1 Year Limited Warranty (excluding batteries which have a 180 day limited warranty). ADJ DMX Controllers = 2 Year (730 Days) Limited Warranty All American Audio branded products = 1-year (365 days) Limited Warranty (except V-Plus Series Amplifiers) All American Audio V-Plus Series Amplifiers = 3-year (1095 days) Limited WarrantyProduct Videos
Videos Hide Videos Show Videos
-
*NEW ADJ | Profile Panel RGBA | Bringing back a classic?
ADJ has released a lot of new fixtures that are upgraded versi...
-
ADJ Profile Panel RGBA "First Look!" DJ Expo 2017
http://www.adj.com/profile-panel-rgba The ADJ Profile Panel R...
-
ADJ Profile Panel RGBA
http://www.adj.com/profile-panel-rgba The ADJ Profile Panel R...