Williams Sound Rechargeable FM ADA Compliance Kit for One Presenter and up to Four Listeners
Description
Same as FM ADA KIT 37, plus charger. Provides everything you need to accommodate individuals for hearing accessibility in a small-group settings such as libraries, conference rooms and information desks. This portable, easy-to-use FM system operates at 72-76 MHz on one of 17 selectable channels. This single kit satisfies ADA requirements for multiple-room facilities.
NOTE: The FM ADA Compliance Kit is approved by the FCC for operation in U.S. markets. The system cannot be used in all countries. Check with your government´s radio regulations for 72-76 MHz operation.
Disclaimer: FCC rules limit use of this equipment to auditory assistance.
Lifetime PLUS Limited Warranty (90 days on accessories)
Meets new 2010 ADA accessibility guidelines
Made in USA
Applications:
Jury Rooms Small Meeting Rooms Council Chambers Parent/Teacher Conferences Libraries Small Conference Rooms Consultation Rooms Information Desks
specifications
Chg 3502
Dimensions:
4-7/8"L x 3-7/8""W x 2"H (12.4 cm L x 9.8 cm W x 5.1 cm)
Shipping Weight:
1.1 lbs (0.5 kg)
Enclosure:
Black, ABS plastic
Charger Power:
Input: 6 VDC, 300mA, Center Positive.
Output: 100mA per bay.
Power Supply:
Williams Sound TFP 041 (US) or TFP 030 (International).
Input: 100-240 VAC, 50-60Hz, 0.5-0.3 A
Output: 6 VDC, 1.5 A.
Charging Time:
16 hours nominal *
Unit Capacity:
2 Units
Indicators:
2 Red LEDs - one for each bay. LEDs are lit when charging.
Warranty:
90 days
Approvals:
CE, FCC, RoHS
Hed 027
Style
Heavy-duty, folding, mono headphones
Plug
3.5mm mono
Cord
39"
Driver Size
40 mm
Nominal Impedance
16Ω
Freq. Response
20 - 20kHz
Weight
102g
Max Power Input
100 mW
Sensitivity
96 dB @ 1kHz
Replacement Pads
EAR 035 (one pair)
Idp 008
10-3/8" (L) x 6-¼" (W) x 1/8" (H)
Mic 049
Phantom Power
1.2 - 10 VDC
Impedance
1.5 kΩ
Operating Voltage
1.2 - 10 VDC
Freq. Response
100 Hz - 8 kHz
Signal-to-Noise Ratio
>60 dB
Pick-Up Pattern
Omni-directional
Element
Electret-condenser
Sensitivity
-38 dB ± 3 dB
Approvals
RoHS
Color
Black
Weight
0.08 lbs
Plug
3.5 mm mono
Cord Length
36”
Approvals
RoHS
Warranty
90 days
Mic 090
Element
Electret-Condenser
Pick-Up Pattern
Omni-directional
Phantom Powered
No
Impedance
1.5 kΩ
Frequency Response
20 Hz – 18 kHz
Dynamic Range
79 dB
Sensitivity
-56 ± 3 dB
Signal-to-Noise Ratio
63 dB
Plug
3.5 mm, right-angle
Cord Length
39”
Color
Black
Weight
0.05 lbs
Replacement Windscreen
WND 006
Replacement Clip
CLP 090
Approvals
RoHS
Warranty
90 days
Ppa r37 architectural and engineering specifications
The PPA R37 receiver shall be encased in black, PC/ABS impact-resistant plastic with a hinged battery door. The receiver shall be a body-pack style and include a detachable belt-clip for hands-free operation. The receiver shall have a 3.5mm stereo/mono jack to accommodate stereo or mono low impedance earphones, headphones and neckloops. The receiver shall have a combination volume control with power on/off rotator dial. It shall have a green LED indicating battery and system status codes. The R37 shall have access to 17 preset wideband channels between 72-76MHz. Channel selection shall be made by pushing the seek button inside the battery compartment. The receiver shall have channel-lock capability.
The receiver shall have a slide switch inside the battery compartment to select disposable Alkaline or NiMH rechargeable battery operation. It shall have charger contacts on the bottom of the receiver for use with Williams Sound drop-in chargers CHG 3512 and CHG 3502. The R37 shall operate up to 50 hours with two disposable AA Alkaline batteries and up to 32 hours with two AA NiMH rechargeable batteries (BAT 026).
The receiver shall provide a maximum out of 35mW at 16ø with an earbud type earphone. The systems audio frequency response shall be 200Hz to 15kHz ± 3dB and the signal to noise ratio shall be 65dB min. The receiver sensitivity shall be 2μV or better at 12dB Sinad with squelch defeated. The R37 shall accept up to ±75kHz FM deviation and have a 75 μ s de-emphasis time constant.
The R37 shall have FCC, Industry Canada approvals and be compliant with RoHS and WEEE regulations. The receiver shall be covered by a Lifetime PLUS Limited Warranty, excluding earphones, headphones and batteries.
This receiver model shall be the Williams Sound model PPA R37.
Ppa r37
Dimensions:
4.1" x 2.85" x 1.38" (104 x 72 x 35mm)
Weight:
4.6oz (130g) with batteries. 2.6oz (73g) without batteries
Color:
Black
Battery Type:
(2) AA Alkaline or 2 x AA NiMH
Battery Life:
Two (2) AA non-rechargeable alkaline batteries (BAT 001), approx. 50 hrs
Enters sleep mode after approx 6 mins of no RF signal
Approvals:
FCC, Industry Canada, RoHS, WEEE
Warranty:
Lifetime PLUS Limited Warranty, 90 Days on most accessories.
Ppa t46 architectural and engineering specifications
The transmitter shall be a wide-band body-pack transmitter and shall operate on 17 selectable frequencies between 72MHz and 76MHz. It shall operate for up to 30 hrs with two AA Alkaline batteries and be housed in a black plastic enclosure with an aluminum faceplate. It shall have battery recharge ability utilizing Williams Sound drop-in chargers.
The transmitter shall have a 3.5 mm microphone jack and a 2.5 mm auxiliary audio input jack. The microphone cord will serve as the transmitting antenna. The Transmitter shall have three buttons on the front to access channel select, master and aux gain, compression on/off, channel lock and screen adjustments. There shall be an OLED screen on the front of the Transmitter displaying current operating status and menu information.
The transmitter shall have the ability to operate in dual channel mode whereby the user can switch between two different transmitting channel presets, each with its own set-up parameters (channel, master volume, aux volume).
There shall be a power switch which also serves as a microphone mute control on the top bezel of the transmitter.
The transmitter shall have wide band FM modulation at 75 KHz peak with a frequency response of 180 Hz to 13 KHz.
The transmitter shall be covered under a limited lifetime parts and labor warranty.
The transmitter shall comply with FCC Part 15.
This transmitter shall be the Williams Sound model PPA T46.
Ppa t46
Dimensions:
4.1” L x 2.8” W x 1.1” D (104 mm x 71 mm x 28 mm)
Weight:
2.6 oz (74 g), no batteries
Color:
Black/Silver
Enclosure Material:
Shatter-resistant PC/ABS plastic with textured scratch-resistant aluminum faceplate
Battery Type options:
Two (2) AA 1.5 V non-rechargeable Alkaline batteries (BAT 001-2), 75 mA nominal current drain, up to 30 hours battery life
Two (2) AA 1.5 V NiMH rechargeable batteries (BAT 026-2), 75 mA nominal current drain, up to 20 hours battery life per charge, recharges in 14–16 hours, uses CHG 3502 or CHG 3512 Charger
± .005%, frequency synthesized, crystal reference, PLL
Modulation:
Wide-band FM, 75 kHz peak, 75 µS pre-emphasis
RF Output:
80 mV/m at 3 m (max. allowed by FCC rules)
Range:
150 ft/45 m
Frequency Response:
180 Hz to 13 kHz, ± 3 dB at 1% max. THD
Signal-to-Noise Ratio:
65 dB (typical) transmitted
Transmit Antenna:
Integral with microphone cord
Microphone:
Electret type, 3.5 mm mono plug
External Display:
OLED for status and menu information.
Status: Ch/Freq, Mic Audio Level, Auxiliary Input Audio Level, Battery Status, Mic Mute, Channel Lock, Dual-Preset mode.
Menu: Ch/Freq display mode select, Volume, Aux Input, Compression,
17 or 8-channel mode, screen time out, screen brightness, restore default settings
External Controls:
Momentary push button: push and hold 3 seconds for power On/Off, push and release for microphone mute On/Off. “Up”, “Down” and “Menu” buttons for accessing and changing transmitter settings. Battery type switch (Alkaline or NiMH) located behind the battery compartment door
External Indicators:
Power LED - Green, flashes when battery is low
Mic Input:
3.5 mm mono jack with electret mic bias, adjustable gain with
25 dB range
Aux Input:
2.5 mm stereo jack, adjustable gain with 60 dB range
Lifetime PLUS Limited Warranty, 90 Days on most accessories.
The PPA T46 is FCC Part 15 compliant.
Effective July 11, 2016, the FCC has mandated tighter emissions limits on auditory assistance transmitters (72-76 MHz) manufactured or imported after this date to help avoid interference with and/or degradation of other airborne signals (All products manufactured prior to July 11, 2016, are compliant). Williams Sound FM transmitters – PPA T46, PPA T27 and PPA T45 (all models) – all have received a Grant of Certification from the FCC and are fully compliant/approved under this new mandate.
Other Details
2 Year Warranty
Williams AV products are engineered, designed, and manufactured under carefully controlled conditions to provide you with many years of reliable service.
Williams AV warrants the BluePOD® Controller and Bluetooth Wireless Access Point (B-WAP) against defects in materials and workmanship under normal use and conditions for 2 years from date of purchase.
This warranty is available to the original end purchaser of the product and CAN BE transferred to subsequent purchasers of the product.
Microphones, earphones, headphones, batteries, chargers, cables, carry cases, and most other accessory products carry a 90-day warranty.
Williams AV has no control over the conditions under which this product is used. Williams AV, therefore, disclaims all warranties not set forth above, both express and implied, with respect to the BluePOD® system, including but not limited to, any implied warranty of merchantability or fitness of use of such equipment including, without limitation, any warranty that the use of such equipment for any purpose will comply with applicable laws and regulations. Williams AV shall not be liable to any person or entity for any medical expenses or any direct, incidental or consequential damages caused by any use, defect, failure or malfunctioning of the product, whether a claim for such damages is based upon warranty, contract, tort or otherwise. The sole remedy for any defect, failure or malfunction of the products is replacement of the product. No person has any authority to bind Williams AV to any representation or warranty with respect to the BluePOD®. Unauthorized repairs or modifications will void the warranty. This warranty is void if damage occurred because of misuse, or if the product has been repaired or modified by anyone other than a factory authorized service technician. Warranty does not cover normal wear and tear on the product or any other physical damage unless the damage was the result of a manufacturing defect. Williams AV is not liable for consequential damages due to any failure of equipment to perform as intended. Williams AV shall bear no responsibility or obligation with respect to the manner of use of any equipment sold by it.
This warranty does not cover reimbursement for your costs of removing and transporting the product for warranty service evaluation or installation of any replacement product provided under this warranty.
The exclusions and limitations set out above are not intended to, and should not be construed so as to contravene mandatory provisions of applicable law. If any part or term of this Disclaimer of Warranty is held to be illegal, unenforceable, or in conflict with applicable law by a court of competent jurisdiction, the validity of the remaining portions of this Disclaimer of Warranty shall not be affected, and all rights and obligations shall be construed and enforced as if this Limited Warranty did not contain the particular part or term held to be invalid. The terms of the warranty are governed by the laws of the State of Minnesota.
Prices and the specifications of the products are subject to change without notice.