Product Description
ETC UFD Unison Foundry 600W 120V DMX Phase-Adaptive Dimmer
The Foundry 600W Dimmers provide DMX controlled line dimming of various load types. The Phase Adaptive dimmer is perfect for Electronic Low Voltage (ELV), Incandescent, and Fluorescent loads, while the Forward Phase dimmer is better suited for Magnetic Low Voltage (MLV) loads. The dimmers mount to an electrical junction box.
APPLICATIONS
• Arena and stadium suites
• Office buildings
• Conference and meeting rooms
• Healthcare facilities
• Houses of worship
• Classrooms
• Hospitality and restaurants
• Retail
FEATURES
• Single-channel, 600-watt dimmer
• 120 V or 277 V models
• DMX controlled and RDM configurable
REGULATORY AND COMPLIANCE
• UL and cUL LISTED
- Conforms to UL 508 and UL 2043
FUNCTIONAL
• Control individual fixture or zone power for tungsten, line-voltage LED and other general-purpose lighting or plug loads
• Supports loads up to 600 W, minimum load of 1 W
• Phase Adaptive Dimmer provides automatic detection of required dimming mode (forward or reverse phase) with manual override selection
• Supports USITT DMX512-A (ANSI E1.11)
• Supports RDM (ANSI E1.20)
MECHANICAL
• Constructed of injection-molded ABS plastic
• Button interface and LED indicators for configuration
• Half-inch conduit knockout mounted • Mains-voltage wiring exits through knockout mount
• DMX wiring connects to side of controller
• External heatsink
• Mains power input:
- 12 AWG Hot
- Black (120 V), Brown (277 V)
- 14 AWG Neutral - White
- 12 AWG Ground - Green/Yellow
• Dimmed output:
- 12 AWG - Red
ELECTRICAL
• 120 V or 277 VAC, 50/60 Hz power input
• Phase-adaptive dimming option, default reverse phase
• Forward phase dimming option for Magnetic loads
• 600W load capacity
DMX INPUT PORT
• Optically-isolated input from Dimmer electronics
• Withstands fault voltages of up to 250 VAC
• Integrated DMX/RDM termination
CONFIGURATION
• Remote configuration available via RDM controllers including:
- ETC DMX/RDM gateway networked to a device running ETC Net3 Concert software
- ETC control console with RDM functionality
- 3rd party configuration and control products
• Manual configuration of the starting DMX address on the controller
THERMAL
• Ambient room temperature: 0–50° C (32°–113° F)
• Ambient humidity: 5–95% non-condensing