Product Description
Audix TM1 Omni-Directional Test And Measurement Microphone
The TM1 is a 6 mm pre-polarized condenser microphone used for test and measurement applications. The TM1 is known for its linearity, accurate response, consistency, ease of use, and affordability.
Equipped with a uniformly controlled omnidirectional polar pattern, the TM1 condenser microphone is designed to capture acoustic measurements for room analysis software programs, real-time analyzers, and other sound control devices. With a flat frequency range of 20 Hz – 20 kHz, the TM1 is an excellent tool for sound engineers, sound companies, and recording enthusiasts.
The TM1 omnidirectional test and measurement microphone is designed, machined, assembled, and tested by Audix in the USA.
MODEL VARIATIONS
TM1PLUS – includes calibration data file and sensitivity, threaded acoustic windscreen, and CA4231 machined calibration adapter *
*Bruel & Kjaer® 4231 sound level calibrator or equivalent
WHAT'S IN THE BOX?
- 1x TM1 Test & Measurement Microphone
- 1x DCLIP Microphone Clip
- 1x Carrying Pouch
FEATURES
- 6mm pre-polarized condenser capsule
- Hi SPL response
- Precision machined brass housings
- Low noise electronics
- Replaceable electronics and capsule
- 3 year warranty
APPLICATIONS
- Test and measurement
- Real time analyzers
- Room analysis software programs
- Ambient room miking
SPECIFICATIONS
Transducer Type | Pre-polarized Condenser |
---|---|
Frequency Response | 20 Hz – 20 kHz +/-2 dB |
Polar Pattern | Omni |
Output Impedance | 200 ohms |
Sensitivity | 6 mV / Pa @ 1k |
Equivalent Noise Level | 28 dB (A weighted) |
Signal to Noise Ratio | 66 dB |
Maximum SPL | 130 dB with distortion <1% 140 dB Max |
Power Requirements | 24 – 48 V Phantom |
Power Consumption | 8.9 mA @ 48 Volts |
Connector | Switchcraft® or Audix male XLR |
Polarity | Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector |
Materials / Finish | 4 piece precision machined brass / Nickel Finish |
Weight | 132 g / 4.7 oz |
Length | 150 mm / 5.9 in |